Electro-Mechanical and Mechatronics Technologist and Technician resume
What the work involves, what it pays, and real lines you can start from. Answer a few small questions and leave with a resume.
Also called automation technician, calibration technician, certified control systems technician and commercial drone technician.
$73,900
Median pay a year
15,520
People do this work
6
Resume lines ready for you
Pay and headcount are from the Bureau of Labor Statistics. The lines are written from what the US Department of Labor records about this work.
An example
A Electro-Mechanical and Mechatronics Technologist and Technician resume, filled in
Every line below comes from the same public record as the rest of this page. The greyed parts are the ones only you can answer.
Electro-Mechanical and Mechatronics Technologist and Technician
Summary
Electro-Mechanical and Mechatronics Technologist operating, testing, and maintaining automated and electromechanical equipment, including performing assembly, modification, and repair of components while utilizing CAD software for design and documentation
Experience
Electro-Mechanical and Mechatronics Technologist and Technician
Where you worked
Month Year to Month Year
Tested performance of electromechanical assemblies using oscilloscopes, electronic voltmeters, and bridges
Installed and programmed computer hardware and instrumentation software in microprocessor-based systems
Read blueprints, schematics, and technical orders to determine methods and sequences of assembly
Modified, maintained, and repaired electrical, electronic, and mechanical components to ensure proper functioning
Inspected parts for surface defects to maintain quality standards
Fabricated and assembled mechanical, electrical, and electronic components or assemblies
Produced electrical, electronic, or mechanical drawings using computer-aided design (CAD) software
Skills
Core Skills
Testing systems or equipment, Assembling equipment components, Designing electromechanical systems, Reviewing technical documents, Evaluating equipment characteristics, Analyzing computer design requirements, Analyzing costs and benefits, Determining operational methods, Maintaining electromechanical equipment
Checking & Planning
Inspecting finished products
Education
Certificate Your training program, Year
Yours will not say this. It will say what you did, in your own words, and Rung writes it with you one question at a time.
Nothing to write from scratch
What to put on an Electro-Mechanical and Mechatronics Technologist and Technician resume
Real duties for this job, already written the way a resume reads. Inside Rung you choose the ones that were yours.
What did you do each day?
Choose what fits, or say your own.
Tested performance of electromechanical assembliesInstalled and programmed computer hardware and softwareRead blueprints and schematics for assembly methodsModified and repaired electrical and mechanical componentsInspected parts for surface defectsFabricated and assembled mechanical and electronic components
becomes
On your resume
Tested performance of electromechanical assemblies using various test instruments to ensure functionality and compliance with specifications
Read blueprints and schematics to determine assembly methods and sequences for efficient installation and troubleshooting
These are written the way a resume line reads. Rung asks which ones are actually yours, keeps your own words, and never claims work you did not do.
Then it asks for one more thing
The line that could show more, and the fact that lands it.
Make it stronger
A few lines could show more. Each one is asked, and answered by choosing.
Add what improved in functionality after your tests.
The line
Tested performance of electromechanical assemblies, reducing errors in assembly processes to ensure functionality and compliance with specifications
Add what improved in functionality after your tests.
Pick one that fits
Reduced errors in assembly processesEnhanced performance of electromechanical systems
Or add your own.
In your wordsAdd it
Adding it to the line…
Added to your resume
Mention how this helped speed up installations or repairs.
The line
Read blueprints and schematics to determine assembly methods and sequences for efficient installation and troubleshooting
Mention how this helped speed up installations or repairs.
Pick one that fits
Cut down installation time significantlyStreamlined troubleshooting processesMade repairs faster and more accurate
Or add your own.
In your wordsAdd it
Adding it to the line…
Added to your resume
Every ready answer is in plain words, never a figure. Nothing is invented to fill a gap.
What it is made of
Skills for an Electro-Mechanical and Mechatronics Technologist and Technician resume
What this work is made of. Rung offers these and keeps the ones you claim.
What are you good at?
Testing systems or equipment
Maintaining electromechanical equipment
Inspecting finished products
Assembling equipment components
Designing electromechanical systems
Reviewing technical documents
Evaluating equipment characteristics
Analyzing computer design requirements
Analyzing costs and benefits
Determining operational methods
Implementing design improvements
Selecting project materials
The work itself
What an Electro-Mechanical and Mechatronics Technologist and Technician does
The public record of what this job is, in one paragraph.
Operate, test, maintain, or adjust unmanned, automated, servomechanical, or electromechanical equipment. May operate unmanned submarines, aircraft, or other equipment to observe or record visual information at sites such as oil rigs, crop fields, buildings, or for similar infrastructure, deep ocean exploration, or hazardous waste removal. May assist engineers in testing and designing robotics equipment.
What it pays
How much does an Electro-Mechanical and Mechatronics Technologist and Technician make?
Annual pay across the United States. The middle figure is the median: half earn less than that, and half earn more.
25th percentile
$59,780
Median
$73,900
75th percentile
$88,540
About 15,520 people do this work in the United States.
What it pays in each state
State
25th percentile
Median
75th percentile
AK
$61,450
$80,290
$122,450
AL
$49,220
$66,660
$85,280
AZ
$71,190
$80,930
$89,830
CA
$71,090
$81,550
$105,510
CO
$61,080
$74,730
$76,760
CT
$68,630
$81,860
$100,630
FL
$61,160
$75,450
$80,640
GA
$56,270
$68,720
$85,070
IA
$57,040
$73,010
$80,680
ID
$60,220
$70,830
$75,300
IL
$77,850
$79,400
$95,740
IN
$41,120
$47,440
$72,910
KY
$58,810
$65,270
$86,960
LA
$65,150
$75,410
$84,880
MA
$60,240
$73,630
$85,770
MD
$65,270
$75,330
$101,760
ME
$68,800
$82,510
$83,260
MI
$59,330
$62,460
$76,850
MN
$54,770
$61,670
$75,950
MO
$59,180
$65,360
$78,970
MS
$66,590
$71,420
$75,820
MT
$63,780
$77,340
$82,480
NC
$57,810
$63,330
$76,930
ND
$73,350
$82,820
$100,190
NE
$66,120
$72,800
$77,910
NH
$56,460
$75,780
$97,930
NJ
$55,640
$60,040
$79,800
NM
$101,580
$119,320
$123,240
NV
$59,720
$82,010
$100,120
NY
$60,730
$68,010
$83,860
OH
$61,070
$73,050
$83,540
OK
$55,660
$65,100
$71,050
OR
$45,450
$67,140
$74,430
PA
$59,460
$74,710
$82,290
SC
$51,720
$67,610
$78,640
TN
$58,710
$64,720
$72,050
TX
$44,720
$54,460
$76,330
VA
$60,550
$74,880
$97,070
WA
$70,890
$81,220
$110,650
WI
$63,620
$76,290
$84,330
Other names
Other names for this job
automation technician, calibration technician, certified control systems technician, commercial drone technician, drone technician, electrical and instrumentation technician, electromechanical assembly technician, electromechanical technician, electronics technician, em assembly technician, em technician, field service technician.
More names for this work
instrument and controls technician, instrumentation technician, mechanical technician, mechatronics technician, metrology calibration technician, photovoltaic fabrication and testing technician, pv fabrication and testing technician, remotely piloted aircraft technician, remotely piloted vehicle engineering technician, research and design lab technician, rework technician, robotics testing technician, rpa technician, rpv engineering technician, supply chain technician, test engineering technician, test technician, ua technician, uas technician, uav technician, unmanned aerial systems technician, unmanned aerial vehicles technician, unmanned aircraft systems technician, unmanned aircraft technician, electro mechanical and mechatronics technologists and technicians, automation tech, automation test specialist, commercial drone operator, commercial drone pilot, drone operator, drone pilot, E and I tech, electro mechanic, electromechanical assembler, electromechanical engineering technologist, electromechanical equipment tester, electromechanical specialist, electromechanical technologist, electronic industrial control mechanic, electronics tech, em assembler, em engineering technologist, em equipment tester, em specialist, em technologist, hardware rework specialist, ie pm inspector, instrument and controls tech.
If you served
Military jobs this work counts as
From the crosswalk the US Department of Labor publishes itself. If one of these was your job, this page is about the civilian work it maps to.
15C MQ-1 Operator
15W RQ-7 Operator
7318 VMU MQ-9 Officer
1U011 Sensor Operator Helper
1U000 Sensor Operator Manager
002823 Robotics Systems Manager
7315 Group 3 UAS MAGTF Officer
1U071 Sensor Operator Craftsman
7314 Sensor Operator (SO), MQ-9
1U031 Sensor Operator Apprentice
1U051 Sensor Operator Journeyman
002822 Robotics Systems Specialist
and 62 more service codes map here
Free resume help
Start with this job
Answer a few small questions and leave with a resume. Your answers stay on your own device.
A truly free resume that is yours to keep
You leave with a PDF and a Word file, and a cover letter if you want one.
Nothing to pay when you download, no account, and the resume saves to your own device.
Every question can be read aloud, and answered out loud.
Nothing to write from scratch: the lines are ready, and you choose the ones that were yours.
This page is about the occupation Electro-Mechanical and Mechatronics Technologists and Technicians. What this job involves and what it is made of come from O*NET 30.3, the US Department of Labor's occupation database, refreshed July 2026; Rung writes those records into the plain sentences you see. Pay comes from the Bureau of Labor Statistics OEWS release for 2025. Rung is an independent service and is not affiliated with or endorsed by either agency. How Rung handles accuracy is on the accuracy page, and the full data credits are on the credits page.