Rolling Machine Setter, Operator, and Tender, Metal and Plastic resume
What the work involves, what it pays, and real lines you can start from. Answer a few small questions and leave with a resume.
Also called cold rolling machine setter, embossing tool setter, guide setter and roll setter.
$50,140
Median pay a year
25,250
People do this work
6
Resume lines ready for you
Pay and headcount are from the Bureau of Labor Statistics. The lines are written from what the US Department of Labor records about this work.
An example
A Rolling Machine Setter, Operator, and Tender, Metal and Plastic resume, filled in
Every line below comes from the same public record as the rest of this page. The greyed parts are the ones only you can answer.
Rolling Machine Setter, Operator, and Tender, Metal and Plastic
Summary
Rolling machine setter operating machines to roll steel or plastic into shapes, flatten materials, and ensure products meet specifications. Monitors cycles, adjusts setups, and records production for tracking output
Experience
Rolling Machine Setter, Operator, and Tender, Metal and Plastic
Where you worked
Month Year to Month Year
Monitored machine cycles and mill operation to detect jamming and ensure products met specifications
Started operation of rolling and milling machines to flatten and form sheet metal sections
Adjusted machine set-ups to reduce thicknesses, reshape products, and eliminate defects
Examined and measured raw materials and finished products to verify they met specifications
Read rolling orders and blueprints to determine setup specifications and product dimensions
Installed equipment such as guides and rolls using hand tools in the mill
Recorded mill production on schedule sheets for tracking output
Skills
Core Skills
Operating metal or plastic forming equipment, Reviewing blueprints and instructions, Reading work orders or instructions, Studying blueprints or instructions, Monitoring instruments, Monitoring equipment operation, Watching operating equipment, Measuring product dimensions, Sorting grades, Driver's license
Checking & Planning
Inspecting composite products
Education
High School Diploma Your school, Year
Yours will not say this. It will say what you did, in your own words, and Rung writes it with you one question at a time.
Nothing to write from scratch
What to put on a Rolling Machine Setter, Operator, and Tender, Metal and Plastic resume
Real duties for this job, already written the way a resume reads. Inside Rung you choose the ones that were yours.
What did you do each day?
Choose what fits, or say your own.
Monitored machine cycles and operationsAdjusted machine setups for thicknessStarted rolling and milling machinesInspected raw materials and finished productsRead orders and blueprints for setupManipulated controls to adjust machine speeds
becomes
On your resume
Monitored machine cycles and operations to ensure smooth production and prevent jamming
Started rolling and milling machines to flatten and form materials according to specifications
These are written the way a resume line reads. Rung asks which ones are actually yours, keeps your own words, and never claims work you did not do.
Then it asks for one more thing
The line that could show more, and the fact that lands it.
Make it stronger
A few lines could show more. Each one is asked, and answered by choosing.
Show what improved once the machine cycles were monitored
The line
Monitored machine cycles and operations, resulting in fewer jams during production
Show what improved once the machine cycles were monitored
Pick one that fits
Fewer jams during productionSmoother operation of machinesLess downtime for repairs
Or add your own.
In your wordsAdd it
Adding it to the line…
Added to your resume
Add how often you started the machines each shift
The line
Started rolling and milling machines to flatten and form materials according to specifications
Add how often you started the machines each shift
Pick one that fits
Several times each shiftA few times dailyMost of the time during production
Or add your own.
In your wordsAdd it
Adding it to the line…
Added to your resume
Every ready answer is in plain words, never a figure. Nothing is invented to fill a gap.
What it is made of
Skills for a Rolling Machine Setter, Operator, and Tender, Metal and Plastic resume
What this work is made of. Rung offers these and keeps the ones you claim.
What are you good at?
Operating metal or plastic forming equipment
Reviewing blueprints and instructions
Reading work orders or instructions
Studying blueprints or instructions
Monitoring instruments
Monitoring equipment operation
Watching operating equipment
Inspecting composite products
Measuring product dimensions
Sorting grades
Calculating labor requirements
Selecting production equipment
The work itself
What a Rolling Machine Setter, Operator, and Tender, Metal and Plastic does
The public record of what this job is, in one paragraph.
Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate, or to flatten, temper, or reduce gauge of material.
What it pays
How much does a Rolling Machine Setter, Operator, and Tender, Metal and Plastic make?
Annual pay across the United States. The middle figure is the median: half earn less than that, and half earn more.
25th percentile
$44,020
Median
$50,140
75th percentile
$61,880
About 25,250 people do this work in the United States.
What it pays in each state
State
25th percentile
Median
75th percentile
AL
$50,240
$53,380
$73,880
AR
$39,760
$45,890
$65,060
AZ
$45,630
$47,820
$57,330
CA
$40,080
$48,040
$61,920
CO
$48,140
$57,500
$61,750
CT
$43,910
$60,610
$63,360
FL
$38,660
$46,810
$65,610
GA
$38,020
$45,050
$52,950
IA
$58,700
$72,670
$72,670
IL
$47,610
$54,180
$62,590
IN
$41,160
$45,430
$56,160
KS
$36,790
$40,260
$49,750
KY
$45,040
$50,400
$55,410
LA
$47,070
$49,920
$66,030
MA
$46,770
$47,830
$58,290
MD
$58,430
$61,470
$64,410
MI
$39,940
$44,090
$58,510
MN
$51,640
$60,620
$65,310
MO
$38,650
$47,390
$49,550
MS
$38,500
$39,320
$47,290
NC
$44,590
$48,450
$54,470
ND
$43,370
$43,480
$45,260
NE
$36,530
$45,800
$50,370
NH
$48,700
$60,570
$73,040
NJ
$42,250
$46,980
$60,310
NY
$51,370
$60,890
$85,340
OH
$45,920
$50,030
$58,780
OK
$37,490
$48,330
$50,370
OR
$43,190
$50,400
$81,630
PA
$54,330
$66,970
$69,240
PR
$22,640
$22,650
$26,430
SC
$39,130
$48,210
$56,660
SD
$39,020
$46,040
$48,880
TN
$38,930
$48,540
$54,140
TX
$41,340
$49,660
$58,300
UT
$45,220
$47,540
$53,490
VA
$42,340
$46,450
$57,800
VT
$53,420
$66,240
$78,810
WA
$47,070
$63,560
$88,450
WI
$45,910
$51,370
$58,310
Other names
Other names for this job
cold rolling machine setter, embossing tool setter, guide setter, roll setter, roll tube setter, setter, spline rolling machine job setter, rolling machine setters operators and tenders metal and plastic, bar finish operator, bar roller, barrel roller, barrel roller operator.
More names for this work
bed operator, brass roller, breakdown coordinator, breakdown mill operator, breakdown operator, bulldogger, calender operator, caster operator, coiler operator, cold form operator, cold headerman, cold mill operator, cold reduction roller, cold roll catcher, cold roll operator, cold roller, cold rolling coordinator, cold strip feeder, cold strip roller, delivery table operator, drum straightener, entry table operator, finish rolls operator, finisher, first leveler, flange machine operator, flanger, flat breakdown processor, forming operator, forming roll operator, forming specialist, foundry processor, high speed operator, hot mill operator, hot mill roller, hot mill tin roller, hot roller, hot strip finisher, hotbed lever operator, hotbed operator, leveler, machine operator, mangle roll operator, mangle roller, mangler, manipulator, manipulator operator, medart operator.
Free resume help
Start with this job
Answer a few small questions and leave with a resume. Your answers stay on your own device.
A truly free resume that is yours to keep
You leave with a PDF and a Word file, and a cover letter if you want one.
Nothing to pay when you download, no account, and the resume saves to your own device.
Every question can be read aloud, and answered out loud.
Nothing to write from scratch: the lines are ready, and you choose the ones that were yours.
This page is about the occupation Rolling Machine Setters, Operators, and Tenders, Metal and Plastic. What this job involves and what it is made of come from O*NET 30.3, the US Department of Labor's occupation database, refreshed July 2026; Rung writes those records into the plain sentences you see. Pay comes from the Bureau of Labor Statistics OEWS release for 2025. Rung is an independent service and is not affiliated with or endorsed by either agency. How Rung handles accuracy is on the accuracy page, and the full data credits are on the credits page.